Double Glazed Window Repair
Double glazing is a great investment in energy efficiency. It stops loss of heat during winter months and helps to keep your home cool during summer. Repairing your double-glazed windows whenever needed is a great way to keep them in good condition.
Over time, your double-glazed windows may suffer from problems like condensation and misting. This can cause your double-glazed windows to be difficult to open or shut.
Broken Panes
A ball that is rogue or a flying stone from your lawnmowers, or a strong storm can shatter your double-pane windows which can expose your home to the elements. Even though a glass window that has been damaged is difficult to repair however, it does not need to be replaced. The insulated glass between two panes of glass is in good condition, so you can repair your double-paned windows yourself.
To begin, you'll need to take the broken glass out of the frame. This can be messy work and you'll need to be careful to stop any glass shards from falling on the floor or falling out of the frame. Make sure to wear a pair of work gloves to protect your hands and a cloth to protect the area surrounding the broken glass to avoid further breakage or cuts. After removing the broken pane, carefully clean the entire frame of the window to remove any remaining sealant or debris. Sand rough areas of the frame to create a smooth surface to install your new glazing.
After cleaning the frame after cleaning, you can apply a second layer of glass on the seam where you removed the broken pane. This is the most effective way to keep your window sealed and protected and will help you save energy costs by preventing drafts and water from entering your home. Next, you will need to choose the right glazing material. There are several options such as clear tape, which is more durable than regular tape, and can prevent further cracking of your window or glazing film which is similar to clear plastic wrapping. This option has the advantage that it can be painted to match your frame and will also keep out the elements like ice and rain.
Whatever material you use it is important to press the glaziers points into the gap where the putty meets your frame. These will keep the glass in place, and aid in adhering to the frame. You can find glazier's points in hardware stores, and are available in pre-made ropes that you simply roll onto the frame rabbets.
Condensation
Double glazing can be susceptible to condensation issues and if you experience this issue, it is best to contact the company that installed the window. Many companies offer warranties and guarantees to will cover the issues. Condensation and fogging between panes of glass is a clear indication that the seals between your windows are broken and can only be fixed by a professional who will repair both panes.
It's a difficult procedure that requires special tools to remove and replace the window. A professional can complete this task and provide the tools. Using these tools can be dangerous it is best to leave this type of work to a professional.
If you choose to do it yourself, ensure you wear safety glasses and gloves to protect yourself from any broken pieces of glass that might fly away during the process. It is also essential to remove all the putty and metal glazing points from the grooves where the new window will be. It is also recommended to wire-brush the frame and vacuum or wipe it clean with a damp cloth. After the frame is dry, you'll need to order another piece of glass that is 1/8" shorter in both directions than your existing window. Check the glass's fit into the grooves.
You will have to apply a layer of silicone caulk in the grooves of your frames to ensure that your new glass is securely installed. After the silicone caulk is dried, you can smooth it out and make any adjustments. The wood molding will then be reinstalled.
If the weather suddenly changes, double-glazed windows could become difficult to open and close. Extreme temperatures can cause the frames of double-glazed windows to expand or contract, causing them to become sagging and stick. If this is the case, you can try wiping the frames down with water and lubricating the joints. However, it might be best to contact the company who installed your windows to help.
Misunderstood
Misted Double Glazing is a problem with windows that develops when moisture gets trapped between the glass panes of your double glazed windows. Double glazing consists of two glass panes that are separated by an insulating area, typically filled with argon gas to provide improved thermal efficiency. This creates a airtight seal that keeps warm indoor air inside, and cold air outside.
The seal may become damaged over time and moisture can build up between the glass panes which can cause them to turn to become cloudy. This happens because the gap between the panes is heated by sun, which causes water vapour to build up in it.
It is a natural phenomenon however if it occurs between the windows' panes it can be a problem because it will no longer be able control the temperature in the room. Instead, the temperature outside the window will influence the temperature indoors. Northfield Glass can help you in the event that your double-glazed windows begin to fog.
We can replace a single blown sealed unit without needing to replace the entire window. This is much less disruptive than a full replacement. Our misty window repair involves removing the glass, cleaning it, and replacing it with a new one to create an watertight seal.
There are some companies in the field which claim to drill holes into your windows with mist and inject chemicals into them which they say removes the fog & condensation however, we don't recommend this method. This method is not only unsightly, but it could also damage the toughened glass and result in windows that don't completely perform its function.
If you don't fix the problem immediately it could cause mold, which could not only damage the window, but also risk health issues for your family members. Moisture can also cause other issues in your home, like dampness or rot. In double glazing repair Gravesend , it may be necessary to replace the entire window.
Failed or Blown
Double-glazed windows are comprised of two glass panes with an inert or air between them. This increases their thermal efficiency by keeping heat in and the cold out. As time passes the gas will be depressurized and cause various problems.
One of the most frequently encountered is condensation occurring between the panes. Although it's a normal occurrence and doesn't mean that your window has failed, it can be an indication that you have to seal your windows. Condensation can also be an indication of broken double glazing, which will require a re-installation.
Double-glazed windows can also cause draughts. This could be caused by the seal being damaged or a damaged handle or lock. A draught is obvious and result in higher heating costs Therefore, it is essential to get it fixed sooner rather than later. You can test the seals by rubbing around the edges of your window frame to determine whether you feel cold air.
There will also be water beads on the inside of windows if your window seals aren't working. This is a good indicator that you should replace the seals on your double-glazed windows.
Your window frames are made to move a little bit as they have to do to keep the glass sheets in place. However, with time, this special packaging material may become compacted and this will break the all-important seal. This will allow the air to move between the panes, decreasing your window's energy efficiency.
Double glazing that has blown seals is an indication of failure and should be repaired as soon as possible. A damaged seal can stop your double glazing from performing its primary purpose of keeping the cold out and warm in. A damaged seal could let moisture in your home, which can lead to mold and other unpleasant conditions. You should call a double glazing repair specialist as soon as you discover a blowing seal on your double-glazed windows, as they are able to replace the entire unit.